HENKEL AG & CO. KGAA

(HEN3)
  Report
SummaryQuotesChartsNewsRatingsCalendarCompanyFinancialsConsensusRevisions 
SummaryMost relevantAll NewsAnalyst Reco.Other languagesPress ReleasesOfficial PublicationsSector newsMarketScreener Strategies

Henkel : low pressure molding materials protect and seal medical electronics

01/11/2022 | 08:08am EDT

Jan 11, 2022Düsseldorf / Germany

Encapsulants tested to ISO 10993 biocompatibility standards for medical devices

Henkel low pressure molding materials protect and seal medical electronics

Henkel has introduced three new low pressure molding (LPM) materials designed to seal and protect medical devices from moisture, temperature extremes, chemicals, vibration, impact and other environmental concerns. Using a gentle, low pressure process, Loctite PA 6732, Loctite PA 6682 and Loctite PA 6951 completely encapsulate medical devices including catheters, tube sets, connectors, and surgical tools, as well as sensors and switches used in medical diagnostic and monitoring equipment. All three LPM products are tested to Henkel's protocols based upon ISO 10993 biocompatibility standards including skin sensitization, with certificates available on request.

LPM hot melts completely replace thermoplastic housings and allow manufacturers to produce complex and intricate assemblies by customizing part geometry, surface texture, color and opacity. These materials form an adhesive bond with the entire component being encapsulated, becoming part of the component's three-dimensional form and creating a water-tight, chemically-resistant seal. The cost-effective LPM process involves three steps: placing the bare component into a custom mold set, heating the polyamide material and injecting it at low pressure into the mold, and allowing the material to cool rapidly for 10 to 50 seconds before removing the newly encased and bonded component for immediate use.

Formulated to allow greater design freedom than traditional medical encapsulants, Loctite PA 6732, Loctite PA 6682 and Loctite PA 6951 are single component, solvent-free polyamides that are solid at room temperature. Derived from natural fatty acid feed stocks obtained from renewable resources such as soy, rapeseed and sunflowers, they are green and sustainable. No harmful fumes are released during the molding process, and all products are RoHS and REACH compliant.

Loctite PA 6732 is an amber material that performs well in temperatures from -40 to 140°C. Clear Loctite PA 6682 is designed for use in temperatures between -25 and 105°C. Loctite PA 6951 is a colorless material that performs well in temperatures from -40 to 100°C.

These new products are part of Henkel's complete portfolio of LPM products used in electronic components, power and industrial automation, HVAC, and lighting applications. For more information or to request a sample, contact us at industrials@henkel.com or visit https://henkel-adhesives.com/lowpressuremolding.

Disclaimer

Henkel AG & Co. KGaA published this content on 11 January 2022 and is solely responsible for the information contained therein. Distributed by Public, unedited and unaltered, on 11 January 2022 13:07:06 UTC.


© Publicnow 2022
All news about HENKEL AG & CO. KGAA
01:08aS&P Maintains Henkel's Rating, Stable Outlook On Pricing Strategy Amid Inflationary Pre..
MT
05/24HENKEL AG & CO. KGAA : Notification and public disclosure of transactions by persons
EQ
05/24HENKEL AG & CO. KGAA : Notification and public disclosure of transactions by persons
EQ
05/23HENKEL AG & CO. KGAA : Release of a capital market information
EQ
05/19Deutsche Bank Links Henkel Supply-Chain Financing To ESG Criteria
DJ
05/19Deutsche Bank Links Henkel's Supply Chain Funding to Supplier ESG Ratings
MT
05/19Deutsche Bank links Henkel supply chain financing to ESG ratings
RE
05/19HENKEL VORZUEGE : Bernstein reiterates its Neutral rating
MD
05/18HENKEL : Schneider Electric and Henkel collaborate to accelerate decarbonization across th..
PU
05/17Companies count the cost of ditching Russia
RE
More news
Analyst Recommendations on HENKEL AG & CO. KGAA
More recommendations
Financials
Sales 2022 21 050 M 22 478 M 22 478 M
Net income 2022 1 253 M 1 338 M 1 338 M
Net Debt 2022 791 M 845 M 845 M
P/E ratio 2022 20,6x
Yield 2022 2,93%
Capitalization 26 399 M 28 189 M 28 189 M
EV / Sales 2022 1,29x
EV / Sales 2023 1,24x
Nbr of Employees 52 450
Free-Float 62,6%
Chart HENKEL AG & CO. KGAA
Duration : Period :
Henkel AG & Co. KGaA Technical Analysis Chart | HEN3 | DE0006048432 | MarketScreener
Technical analysis trends HENKEL AG & CO. KGAA
Short TermMid-TermLong Term
TrendsBullishBearishBearish
Income Statement Evolution
Consensus
Sell
Buy
Mean consensus HOLD
Number of Analysts 23
Last Close Price 61,96 €
Average target price 70,57 €
Spread / Average Target 13,9%
EPS Revisions
Managers and Directors
Carsten Knobel Chairman-Management Board
Marco Swoboda Chief Financial Officer & Executive VP-Finance
Simone Bagel-Trah Member-Supervisory Board
Thomas Gerd Kuehn Chief Compliance Officer & General Counsel
Michael Kaschke Member-Supervisory Board